Hanibal soft :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
registered in Serbian Authors Agency as Author's Work No. S-29 /04

I INTRODUCTORY REMARKS

  1. The standard licence of a software package for thermo technical calculations HANIBALsoft contains installation CD and a USB dongle device for hardware protection
  2. Programs can be installed on multiple computers, but will only work on one computer on one time, in which USB hardware protection device is curent inserted in

II Discount when buying multiple licenses

number of lic. discount (%)
1 0
2-4 15
5-9 20
10 i vise 25

III PRICELIST FOR INDIVIDUAL PROGRAMS

code description price
01. hanDobGub5.0 Cooling Loads Calculation (ASHRAE CLTD/SCL/CLF method) and Heat Loss Calculation according to DIN4701 (1959/83), EN12831, SNiP , Ordinary Input Mode is only supported 800 eur
02. hanDobGub5.0 Cooling Loads Calculation (ASHRAE CLTD/SCL/CLF method) and Heat Loss Calculation according to DIN4701 (1959/83), EN12831, SNiP , Ordinary Input Mode and Dynamic Input Mode over the AutoCad drawings (the user enters rooms, walls, partitions etc. by drawing them in desired AutoCAD drawings using the commands from HANIBAL toolbar, and then starts automatic export data from drawings back to the program and then performs calculation and calls reports). 1500 eur
03. hanPCM program for design, calculating, sizing and balancing of two-pipe heating and cooling systems with automatic sizing of the radiators and fan-coils units for all existing rooms, Ordinary Input Mode is only supported 600 eur
04. hanPCM program for design, calculating, sizing and balancing of two-pipe heating and cooling systems with automatic sizing of the radiators and fan-coils units for all existing rooms and automatic drawing connection shema and heating units in AutoCAD, Ordinary Input Mode is only supported. 900 eur
05. hanPCM program for design, calculating, sizing and balancing of two-pipe heating and cooling systems with automatic sizing of the radiators and fan-coils units for all existing rooms and automatic drawing connection shema and heating units in AutoCAD. Ordinary Input Mode and Dynamic Input Mode over the AutoCad drawings (the user enters Heating/Cooling units, Sections, Passing Points etc. by drawing them in desired AutoCAD drawings using the commands from HANIBAL toolbar, and then starts automatic export data from drawings back to the program and then performs calculation and calls reports). 1500 eur
06. hanKanCalc program for calculation, dimension determining and balancing air ducts systems. Ordinary Input Mode is only supported. 600 eur
07. hanKanCalc program for calculation, dimension determining and balancing air ducts systems. Ordinary Input Mode and Dynamic Input Mode over the AutoCad drawings (the user enters Air Distribution elements, Duct Sections, Passing Points etc. by drawing them in desired AutoCAD drawings using the commands from HANIBAL toolbar, and then starts automatic export data from drawings back to the program and then performs calculation and calls reports). 1500 eur
08. hanOPcalc Program for calculation one pipe heating system 500 eur
09. hanOPcalc Program for calculation one pipe heating system, with possibility of automatic drawing calculated heating units and diagram of connections in AutoCAD drawings 700 eur
10. hanPGrCalc Program for floor heating system calculation according to EN1264 500 eur
11. hanPGrCalc Program for floor heating system calculation according to EN1264 with possibility of automatic drawing floor heating circuits in AutoCAD drawings, in the contours of arbitrary shape 700 eur
20. hanPipeCalc program for calculation of arbitrary pipelines with arbitrary fluid, Ordinary Input Mode is only supported 600 eur
21. hanPipeCalc program for calculation of arbitrary pipelines with arbitrary fluid, Ordinary Input Mode and Dynamic Input Mode over the AutoCad drawings (the user enters Heat Exchangers, Sections, Sources and the Customers flow etc. by drawing them in desired AutoCAD drawings using the commands from HANIBAL toolbar, and then starts automatic export data from drawings back to the program and then performs calculation and calls reports). 1500 eur

IV PROGRAM PACKAGE FEATURES

In Chapter III are offered two versions of the programs hanDobGub, hanKanCalc, hanOPcalc and hanPGrCalc and three versions of the program hanPCM with described possibilities and prices

User can himself select which programs from above wants in his package

Program package price is obtained by summing the prices of involved programs.

The two default packages are (the cheapest one with Ordinary Input Mode only and most expensive one with Ordinary and Dynamic Input Mode, each of them without hanPipeCalc program and with discount)

HANIBALsoft5.0 Light (programs with codes 01, 03, 06, 08, 10) – 2.400,00 eur

HANIBALsoft5.0 Professional (programs with codes 02, 05, 07, 09, 11) – 4.500,00 eur

Download

Video

hanDobGub

Price list

Price list

Clients list

Clients list